Noblex comfort-riflescopes
For the first time, Noblex offers the well-established automatic reticle illumination control of the Noblex sight in a riflescope. This enables the marksman to focus entirely on the hunting situation. The red dot is ready to use and set at the correct brightness setting immediately upon aiming. A continuous manual re-adjustment is not necessary. The auto intense illumination control detects the brightness in the target area and calculates the perfect reticle brightness in a split second.
auto intense and position sensor
The sensor performance is adjusted to the physiological eye sensitivity and it therefore prevents the over-illumination of the target by the reticle. If necessary, it is also possible to manually adjust the reticle intensity to the individual perception. If the weapon is not used and put down, the integrated position sensor will switch off the light spot automatically. Switch-off is effected in vertical direction if the angle is larger than ± 75°, and for tilting if the angle is larger than ± 45°. The status of the power supply is detected continuously. In case of low battery voltage, a flashing signal of the reticle suggests a battery change.
